Automated manhole profiling helps road agencies quantify height differences, identify sagging, and document localized defects with great precision around manholes. A cover that sits too high, too low, or is surrounded by sagging can reduce ride quality, accelerate pavement deterioration, and make maintenance prioritization more difficult. 
 
Automated manhole profiling makes it possible to move from subjective visual observation to usable objective geometric analysis. With the new Manhole Measurement function in LcmsRoadInspect, teams can measure the height difference between the manhole and the pavement, visualize the area in 3D, and extract profiles centered on the structure. 

Manhole Measurement: How to Standardize the Assessment of Height Differences and Sagging
2:40

Why is manhole measurement difficult with traditional methods?

Visual inspections help identify a problem, but they remain limited when the issue needs to be quantified precisely. Two inspectors may describe the same defect differently, and it is often difficult to consistently estimate the depth of sagging or the elevation difference around a manhole.

The problem becomes even more significant at network scale. When hundreds or thousands of manholes need to be assessed, manual methods lack repeatability and make comparisons from one site to another more difficult.

 

How does automated manhole profiling improve assessment?

The Manhole Profiling function extracts information associated with manholes to get profiles on the manhole to help measure the height difference between the manhole and the surrounding pavement. It  produces a map of the pavement around it, helping identify variations in height and, in particular, areas of sagging. Those same profiles can also be used to measure manhole level along both orientations.

 

What are the main outputs provided by the function?

The new function adds several concrete outputs:

  • Identification of the manhole’s geometric center
  • Two 3-meter 3D profile extractions, one transverse and one longitudinal, centered on the manhole 
  • Georeferencing derived from the navigation heading
  • Extended XML output
  • Point data expressed as X-Y vectors in millimeters
  • Ability to perform manual point-by-point corrections

 

What can a 3D measurement around a manhole identify?

A 3D profile can directly identify height differences between the manhole and the pavement surface, as well as deformation around the structure. This includes settlement or sagging areas that may not be properly described through a simple visual note.  
 
For asset managers and pavement engineers, this information is useful for better documenting localized defects, supporting maintenance decisions, and prioritizing interventions where the impact on the pavement surface is most significant.

 

Manhole_pavemetrics

 

Why is this function useful at network scale?

At network scale, localized defects around manholes are common, but they are often difficult to integrate into a systematic process. A structured, georeferenced output centered on each manhole makes technical review easier and helps ensure more consistent comparisons across different sites.  
 
The extended XML format also provides a practical advantage: in addition to profiles, teams have access to usable point data for validation or targeted corrections when needed.


Learn More

Want to learn more about automated manhole measurement with LCMS RoadInspect?
Contact
Pavemetrics support for more information.

Any questions? We're here to help.

Topics Pavemetrics